ATEK564P3 is a wideband driver amplifier covering 5 to 20 GHz frequency range. Amplifier can be used from 4 GHz.
ATEK564P3 provides flat gain over wideband with positive supply voltage. This allows users to easily realize wideband receiver frontends.
Amplifier housed in compact 3×3 mm low cost SMD package, input and output matched to 50 ohms internally.
Evaluation Board, bare die, custom package, and module options are available upon request.
| Parameter | Condition | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Frequency Range | 4 | 20 | GHz | ||
| Gain (5 V) | 5 GHz | 19.4 | dB | ||
| 8 GHz | 19.7 | dB | |||
| 12 GHz | 20.8 | dB | |||
| 16 GHz | 22.1 | dB | |||
| 20 GHz | 17.8 | dB | |||
| Gain (3 V) | 5 GHz | 20 | dB | ||
| 8 GHz | 21.3 | dB | |||
| 12 GHz | 23 | dB | |||
| 16 GHz | 23.9 | dB | |||
| 20 GHz | 18 | dB | |||
| Isolation (5 V) | 5 GHz | 71 | dB | ||
| 8 GHz | 57 | dB | |||
| 12 GHz | 55 | dB | |||
| 16 GHz | 55 | dB | |||
| 20 GHz | 59 | dB | |||
| Input Return Loss | -13 | dB | |||
| Output Return Loss | -15 | dB | |||
| Output IP3 | 30.5 | dBm | |||
| Output P1dB (5 V) | 20.5 | dBm | |||
| Output P1dB (3 V) | 16.5 | dBm | |||
| Psat | TBD | dBm | |||
| Noise Figure | 6 | dB | |||
| DC Supply Voltage (VDD1=VDD2) | 3 | 5 | V | ||
| DC Supply Current | 110 | 123 | mA | ||
| Operating Temperature | -40 | 85 | °C |
5 – 22 GHz MMIC Driver Amplifier
5 – 22 GHz MMIC Driver Amplifier, Die
