(under construction)
The MAX22212 features an accurate current drive regulation (CDR) which can be used to limit the start-up current of a brushed DC motor or to control the phase current for stepper operation. The bridge output current is sensed by a non-dissipative integrated current sensing (ICS) and it is then compared with user configurable threshold (ITRIP). When the bridge current exceeds the ITRIP threshold, the device enforces the decay for a fixed OFF-time (tOFF). Four different Decay methods are supported (Slow Decay, Fast Decay, and two Mixed Decay modes). The non-dissipative ICS eliminates bulky external power resistors which are normally required for this function resulting in a dramatic space and power saving compared with mainstream applications using external sense resistors.
The MAX22212 features OCP, thermal shutdown (TSD), and undervoltage lockout (UVLO) protection. An open-drain active low FAULT pin is activated every time a fault condition is detected. During TSD and UVLO events, the driver is three-stated until normal operations are restored.
Motor Type: | DC-Motor |
No. Axes: | 1 |
Motor Supply: | 3…36 V |
IO Supply: | 3,3 V |
Bridge Current, RMS: | 4 A |
R DS on | HS+LS: 125mΩ |
Control Interface: | IN1+IN2 |
Package: | TQFN32 5×5 mm TSSOP28 4,4 x 9,7 mm |
Order code: | MAX22212ATJ+ (TQFN) MAX22212AUI+ (TSSOP) |
(not yet available) MAX22212 datasheet (PDF)