MD28-009-o

28mm Stepper Motor with Controller & Driver, 0.09 Nm, 24 V, Absolute Encoder, RS485

The MD42-o Family replaces PD-1021 Family* in our product portfolio.

The MocDrive MD28-009-o, part of the MD28-o Family, is a full mechatronic extremely small and compact solution with state of the art feature set. It includes a motion controller/driver using an outstanding technology for sensorless load dependent current control. This allows an energy efficient operation of an open-loop stepper motor system. Another advanced feature is to detect the load of the motor with high resolution.

The MD28-009-o includes a stepper motor, the IKS28-12E controller & driver electronics, and an absolute encoder. It can be used in many decentralized applications and has been designed for 0,06… 0,12 Nm max. holding torque and 24V DC nominal supply voltage.

The MocOS firmware with serial protocoll allows for standalone operation and direct mode.

*PD-1021 Family: PD28-1-1021, PD28-3-1021

Technical Data

MocDrive	MD28-006-o	MD28-009-o	MD28-012-o
Motor Type	Stepper, 2-phase, bipolar, 1,8°, 200 steps	Stepper, 2-phase, bipolar, 1,8°, 200 steps	Stepper, 2-phase, bipolar, 1,8°, 200 steps
Flange Size	28 x 28 mm NEMA 11	28 x 28 mm NEMA 11	28 x 28 mm NEMA 11
Supply Voltage	20…26 V	20…26 V	20…26 V
Holding Torqe	0,06 Nm	0,09 Nm	0,12 Nm
Motor lenth (/wo cable)	63,5 mm	76,5 mm	82,5 mm
Phase Current Motor	0,67 A	0,67 A	0,67 A
Phase Current Controller, max. (rms, continuous)	1,4 A	1,4 A	1,4 A
Phase Current Controller, max. (peak)	2 A	2 A	2 A
Control Type	open loop + encoder	open loop + encoder	open loop + encoder
Stand Alone & Remote Control	X	X	X
Acceleration Ramp	linear	linear	linear
Step/Dir Driver Input	–	–	–
RS485 Interface	JST	JST	JST
RS232 Interface	–	–	–
USB	–	–	–
CAN Bus	–	–	–
End- [&] Ref.-Switch IN	2x 24 V	2x 24 V	2x 24 V
General Purpose IN (digital)	2x 24 V	2x 24 V	2x 24 V
General Purpose OUT (digital)	2x OD 24 V	2x OD 24 V	2x OD 24 V
General Purpose IN (analog)	–	–	–
Absolute Encoder Resolution	1024 ppr	1024 ppr	1024 ppr
ABN Encoder Interface	–	–	–
Microstep Resolution	1…256	1…256	1…256
Stall/Load Detection	X	X	X
Load Dependent Current Control	X	X	X
Advanced Hysteresis Chopper	X	X	X
Low Noise Chopper	–	–	–
Replacement for	PD-1021 TMCM-1021	PD-1021 TMCM-1021	PD-1021 TMCM-1021
CANopen Protocol	–	–	–
Housing	open frame	open frame	open frame
Order Code	MD28-006-o	MD28-009-o	MD28-012-o
Order Option	–	–	–
Related Cable Loom	IKS28-Kabel	IKS28-Kabel	IKS28-Kabel