28mm/NEMA11 Bipolar Hybrid 1,8° Stepper (0,06-0,12 Nm)
These two phase hybrid stepper motors are optimized for microstepping and give a good fit to the TRINAMIC family of motor controllers and drivers. They can be used in very space critical applications and allow high RPM due to their low back EMF.
There are versions with 8192 line (32768 cpr) optical incremental encoder with ABN interface available, suitable for closed-loop operation.
Technical Data:
| Specifications | Unit | QSH2818-32-07-006 | QSH2818-51-07-012 |
| Flange size | mm | 28 x 28 | 28 x 28 |
| Step Angle | ° | 1.8 | 1.8 |
| Steps/Revolution | Steps | 200 | 200 |
| Holding Torque (typ.) | Ncm | 6 | 12 |
| Rated Phase Current | A | 0.67 | 0.67 |
| Rated Voltage | V | 3.8 | 6.2 |
| Phase Resistance at 20°C | Ohm | 5.6 | 9.2 |
| Motor Length (max.) | mm | 32 | 51 |
| Shaft Diameter | mm | 5 | 5 |
Order Codes:
| Order Code | Description |
| QSH2818-32-07-006 | Stepper Motor without Encoder |
| QSH2818-32-07-006-8192-AT | Stepper Motor with 8192 line encoder |
| QSH2818-51-07-012 | Stepper Motor without Encoder |
| QSH2818-51-07-012-8192-AT | Stepper Motor with 8192 line encoder |
Downloads:
57mm/NEMA23 Bipolar Hybrid 1,8° Stepper (0,55-1,89 Nm)
60mm/NEMA24 Bipolar Hybrid 1,8° Stepper (1,1-3,1 Nm)
86mm/NEMA34 Bipolar Hybrid 1,8° Stepper (3,4-12,8 Nm)
42mm/NEMA17 Bipolar Hybrid 1,8° Stepper (0,27-0,49 Nm)
