Our Products

EM500

EM500 Single UART Programmable Embedded Module

IN FULL PRODUCTION BUT NOT RECOMMENDED FOR NEW DESIGNS. CONSIDER USING EM510 INSTEAD.

The EM500 is an ultra compact Tibbo BASIC/C-programmable IoT Module with Ethernet

The first member of our MiniMo family, the EM500 is designed to be used in tandem with a standard RJ45 magnetics jack. The combined footprint of the EM500 and a typical jack is only 28.5x18.5mm (1.12x0.63").

Compact dimensions, space-saving "vertical slice" form factor, low power consumption, and economical pricing make the module an excellent fit for miniature, cost-sensitive "connected" devices.

Module testing and evaluation can be performed with our EM500EV development system.

The EM500 may be uploaded with a fully functional serial-over-IP (SoI) application that turns the EM500 into a powerful serial over IP (SoI) device, a.k.a. the Ethernet converter.

Key Features:

  • 10/100 Base-T Ethernet port (no RJ45/magnetics)
  • 1 UART, supports serial, Wiegand, and clock/data streams
  • 8 general-purpose I/O lines
  • 512K flash for TiOS and application, support for external 1MB flash disk
  • 208-byte EEPROM
  • Dual-function LED control (using flashing patterns)
  • Height and width of an RJ45 jack,thickness 6.5mm
  • 3,3V power supply

Technical Data

Technical Data:

  • 10/100BaseT auto-MDIX Ethernet port (no magnetics)
  • Optional Wi-Fi interface (requires the GA1000 add-on module)
  • One serial port (CMOS-level): ◾Baudrates of up to 460,800bps
  • None/even/odd/mark/space parity modes
  • 7 or 8 bits/character
  • Full-duplex mode with RTS/CTS and XON/XOFF flow control
  • Half-duplex mode with direction control
  • Encoding and decoding of Wiegand and clock/data streams
  • 8 general-purpose I/O lines (including 2 interrupt lines)
  • 512KB flash memory for firmware and application
    Optional 1MB flash disk (requires an external SPI flash IC)
  • 208-byte EEPROM for data storage
  • Three control lines for status LEDs
  • Control lines for two external dual-function status LEDs
  • A separate control line for the Ethernet link LED
  • External reset source required
  • Based on the T2000 IC
  • Power: 260mA @ 3.3V (100Base-T mode)
  • "Vertical slice" form factor
  • Dimensions (HxWxT): 16x18.5x6.5mm
  • Operating temperature range: -40 ~ +80C
  • Firmware is upgradeable through the serial port or network (including "cold" firmware uploads through the network)
  • CE- and FCC-certified

You may also like…

You may be interested in…

Product Inquiry

Please contact us. We will get back to you as soon as possible.

Product
EM500

I have taken note of the privacy policy. Note: You can revoke your consent at any time for the future by sending an email to info@mev-elektronik.com.

Your Contact Person

Guido Gandolfo

Product Marketing Engineer

+49(0)5424 2340-57

write email
crossmenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram