Our Products

LTPP3(G2)

LTPP3(G2) – Linux Tibbo Project PCB Size 3, Gen.2

The LTPP3(G2) is a Linux-based Tibbo Project PCB belonging to the Tibbo Project System (TPS) platform. The board is based on the powerful quad-core 1GHz Cortex-A7 Plus1 (SP7021) CPU jointly developed by Sunplus and Tibbo.

The LTPP3(G2) features a powerful set of I/O ports located directly on the board. Dual Ethernet ports allow daisy-chaining with other Ethernet devices. Wireless connectivity (through the optional add-on module WA2000) has been expanded to 802.11a/b/g/n/ac and Bluetooth/BLE 5.0, while 4G LTE Cat-1 or NB-IoT is supported through the use of dedicated Tibbits. Also new are integrated HDMI and serial-over-USB console ports, as well as two USB 2.0 Host ports with Type-A connectors and a built-in microSD slot. The board incorporates a power supply with an input range of 8V to 60V, eliminating the need for power Tibbits.

Offering four tiles for a total of eight Tibbit module and eight Tibbit connector sockets, the LTPP3(G2) can be used to create TPS configurations with up to four full serial ports, up to 16 relays, or up to 32 control lines, such as opto-inputs, PWMs, or open-collector outputs.

The LTPP3(G2) can be used as a bare board or assembled into a Size 3 Linux Tibbo Project Box (LTPB3). It also serves as the evaluation board for our Plus1 (SP7021) chip.

The LTPP3(G2) is supported by the TPS Online Configurator through which you can define a custom TPS.

Key Features:

  • Based on Plus1 (SP7021) quad-core 1GHz Cortex-A7 CPU
  • Eight module + eight connector sockets (for a total of 32 I/O lines)
  • Two 10/100 Base-T Ethernet ports support daisy-chaining
  • Optional 802.11a/b/g/n/ac +
  • Bluetooth/BLE 5.0
  • Two USB 2.0 Host ports with
  • USB Type-A connectors
  • Four UARTs + serial-over-USB console port
  • HDMI port for connecting external displays
  • Onboard buzzer
  • Up to four SPI and four I2C interfaces
  • Onboard RTC with
  • backup supercapacitor
  • 512MB DDR3 SDRAM, 4GB eMMC
  • microSD card slot
  • 2048-byte EEPROM
  • Integrated power supply with 8V~60V input range

Technical Data

Technical Data:

  • Quad-core 1GHz Cortex-A7 Plus1 (SP7021) chip
  • Runs a fine-tuned Yocto-based Linux distribution
  • Two 10/100BaseT Ethernet ports with RJ45/magnetics
  • Internal transparent switch for daisy-chaining with Ethernet devices
  • Can alternatively be configured as two independent Ethernet ports
  • Optional 802.11a/b/g/n/ac and Bluetooth/BLE 5.0 add-on module
  • Optional LTE Cat-1 or NB-IoT connectivity through dedicated Tibbits
  • Four tiles with 32 general-purpose I/O lines
  • Eight sockets for Tibbit modules
  • Eight sockets for Tibbit connectors
  • Eight Tibbit module sockets have UART capability
  • Baudrates of up to 921,600bps
  • None/even/odd/mark/space parity modes
  • 7 or 8 bits/character
  • Full-duplex mode with RTS/CTS, XON/XOFF flow control
  • Half-duplex mode with direction control
  • Eight module sockets have interrupt capability
  • Four Tibbit module sockets have SPI/I2C capability
  • Onboard buzzer
  • RTC with a backup supercapacitor
  • 512MB DDR3 SDRAM
  • 4GB eMMC
  • microSD slot
  • 2048-byte EEPROM for data storage
  • Twelve onboard LEDs
  • Green and red main status LEDs
  • Yellow Ethernet link/activity LED (serving both ports)
  • Five blue LEDs (for Wi-Fi signal strength indication, etc.)
  • Two yellow Ethernet link LEDs, one for each Ethernet port*
  • Two green Ethernet activity LEDs, one for each Ethernet port*
  • Serial-over-USB console port
  • Reliable power-on/brown-out reset circuit
  • Power
  • Onboard power supply with 8V to 60V input range provides 2.5A of current and removes need for power Tibbits
  • Current consumption: 400mA@12V (with both Ethernet ports enabled)
  • Dimensions (LxW): 165mm x 94mm
  • Operating temperature range: -40°C to 85°C
  • Linux software and applications are upgradeable using the DNF system

Order Codes:

Order Code Item
LTPP3G2-01 Size 3 Linux Tibbo Project PCB, Gen. 2. Based on “PLus1” SP7021-IF.
Hardware revision “-01”

Documentation:

LTPP3(G2) Hardware Manual
Linux on TPS

Related Articles

Similar Articles

Product Inquiry

Please contact us. We will get back to you as soon as possible.
Product Inquiry

Product
LTPP3(G2)

I have taken note of the privacy policy. Note: You can revoke your consent at any time for the future by sending an email to info@mev-elektronik.com.

Your Contact Person

Guido Gandolfo

Product Marketing Engineer

+49(0)5424 2340-57

write email
Contact us!
Please enter one ore more search terms.
crossmenu linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram