TIDE Tibbo Integrated Develompent Environment

EM510

EM510 Single UART Programmable Embedded Module

The EM510 is an ultra compact Tibbo BASIC/C-programmable IoT Module with Ethernet

The first member of our MiniMo family, the EM510 is designed to be used in tandem with a standard RJ45 magnetics jack. The combined footprint of the EM510 and a typical jack is only 28.5×18.5mm (1.12×0.63″).

Compact dimensions, space-saving “vertical slice” form factor, low power consumption, and economical pricing make the module an excellent fit for miniature, cost-sensitive “connected” devices.

Module testing and evaluation can be performed with the EM510EV development system.

The EM510 may be uploaded with a fully functional serial-over-IP (SoI) application that turns the EM510 into a powerful serial over IP (SoI) device, a.k.a. the Ethernet converter.

Key Features:

Mid-range ARM CPU
10/100 Base-T Ethernet port (no RJ45/magnetics)
Optional Wi-Fi connectivity (with the WA2000 add-on)
Optional BLE (Bluetooth Low-Energy) connectivity (with the WA2000 add-on)
1 UART, supports serial, Wiegand, and clock/data streams
10 general-purpose I/O lines
4 synchronous serial ports with SPI and I2C modes
512K flash for TiOS and application, support for external 1MB ﬂash disk
2048-byte EEPROM
Patented dual-function LED control
Height and width of an RJ45 jack, thickness only 6.5mm 3.3V power
Supports over-the-air (OTA) firmware updates (with WA2000 add-on)
Supported by Cody project generator

Technical Data

Technical Data:

32-bit architecture.
Powered by Tibbo OS (TiOS).
10/100BaseT auto-MDIX Ethernet port (no magnetics).
Optional Wi-Fi interface (requires the WA2000 add-on module).
Optional BLE (Bluetooth Low Energy) interface (requires the WA2000 add-on module).
One serial port (CMOS):
Baudrates of up to 460,800bps,
None*/even/odd/mark/space parity modes,
7* or 8 bits/character;
Full-duplex mode with RTS/CTS and XON/XOFF flow control;
Half-duplex mode with direction control;
Encoding and decoding of Wiegand and clock/data streams.
10 general-purpose I/O lines; 2 lines can work as interrupts.
16.1KB SRAM for Tibbo BASIC/C variables and data.
512KB flash memory for TiOS and application code (224K for app code).
Optional 1MB flash disk (requires an external SPI flash IC).
2048-byte EEPROM for data storage (2016 bytes for the app’s data).
Three control lines for status LEDs:
Control lines for two external dual-function status LEDs;
A separate control line for the Ethernet link LED.
Reliable power-on/brown-out reset circuit (reset IC not required).
Power: 110mA @ 3.3V (100Base-T mode).
“Vertical slice” form factor.
Dimensions (HxWxT): 16 x 18.5 x 6.5mm.
Operating temperature range: -40 ~ +85°C.
Firmware is upgradeable through:
The serial port;
Ethernet LAN; or
Over-the-air (requires the WA2000 and an iOS or Android device).
Tibbo BASIC/C application can be debugged through the Ethernet LAN.
CE- and FCC-certified

EM510 is Supported by Cody, the Template Project Generator

Cody is a template project generator that produces working Tibbo BASIC code from the information you provide via a few simple-to-understand configuration screens.

This web-based app allows you to quickly create a working project that contains proper peripheral, port, and socket initialization. With Cody, you can also swiftly pour in huge chunks of your future product’s functionality: persistent storage of parameters (setting), data tables, multi-level onscreen setup menus, and much much more.

No less important is that Cody generates a template project with the right structure. Software developers know that all programming platforms have (a few) right and (many) wrong ways to structure the code and get things done. Choosing the wrong path usually makes the code slow, inefficient, and unreliable. Cody prevents you from getting lost by giving you the right scaffolding for your project.

Order Codes: